Multi-jet principle spreads the load evenly around the impeller, which cuts wear and keeps the meter accurate for longer. Netafim call these the industry’s smallest water meters
In-line axial turbine lets foreign matter pass straight through instead of jamming the meter — the right choice on surface or reclaimed water that carries debris
Reed switch pulse outputs 10 / 32.6 / 100 on 3"–8", 100 or 325.9 on 10"–12"; photo diode outputs 0.1172–0.378 on 3"–8", 4.505 or 6.73 on 10"–12"
Sizes
3", 4", 6", 8", 10" and 12"
Best for
Built-in straightening vanes on 3"–8" cut the run of straight pipe you need either side — 5 diameters upstream and 2 down, instead of the usual 10. That matters in a pump house where there is no room
±1.5% accuracy, certificate supplied with each meter
Best for
Double-beam ultrasonic sensing with no moving parts to wear or foul, and the widest flow span in the range. Each meter carries a unique unalterable bar-coded serial number and ships with its own flow-accuracy certificate — which is what a water authority will ask for
Corrosion-resistant and light enough to mount on an injection line. The magnetically driven register is sealed and guaranteed not to fog or take up moisture — the usual failure on a meter sitting in a fertigation shed
Grooved sensor; composite flow tube with two coils
Sizes
DN50 to DN150 (2"–6")
Best for
No moving parts at all — two coils across a composite tube read the voltage the flow induces, so nothing wears and nothing fouls. Light and compact for its size, and it stays accurate at low flow rates where a mechanical meter under-reads. This is the meter Bermad pair with the Omega controllers
DC powered with an integrated battery-powered converter
Sizes
DN50 to DN150 (2"–6")
Best for
Battery-powered electromagnetic meter, so it measures accurately at a remote hydrant with no mains supply. Holds accuracy on low flows in difficult conditions
The IR-900 with a solenoid on top — meters the water and switches the zone from the same body. For an automated block this replaces a meter, a valve and the fittings between them
Flanged; magnetic register; reed switch sensor giving one or two pulse outputs
Sizes
40–300 mm (1½"–12")
Best for
Heavy duty and built for high flow. The magnetic register covers a very wide flow range and is sealed from the water, which is what gives it the long service life. Reed switch gives one or two pulse outputs for a controller. Available as Turbo-Bar-M mechanical or Turbo-Bar-E electronic
Straight-flow flanged body; reed switch sensor with one or two pulse outputs
Sizes
2" (DN50) to 12", flanged — Cv 133 at 2", 222 at 2½", 253 at 3"
Best for
The paddle wheel sits out of the main stream, so suspended matter barely touches the measuring element — that is what lets it hold accuracy on irrigation water that would foul a full-bore turbine. Turbo-IR-M mechanical or Turbo-IR-ME with electronic register
The small end of the Bermad range, from ½" up. Multi-jet gives high accuracy and a steady curve across a wide flow range, with a rotating star for at-a-glance flow indication — you can see whether water is moving without reading the dial
Need pricing on any of these water meters? Send the model and quantity, or just describe the block, and we'll come back with wholesale pricing within one business day. Everything on this page is sold to production nurseries, greenhouses and education programs.
Netafim
Bermad