(864) 862-5000

ML Irrigation / Products / Hose, PVC & Fittings

Hose, PVC & Fittings

Schedule 40 and 80 PVC fittings and ball valves, plus compression, insert and barbed fittings, hose reels and couplings.

39 products · 6 manufacturers · wholesale pricing · ships nationwide

Request a quoteCall (864) 862-5000

Hose, PVC & Fittings by manufacturer

Spears

True Union 2000 Ball Valves

Hose & fittings
Pressure
235 psi at 73°F; flanged versions 150 psi
Connection
True union both ends; quarter-turn operation
Sizes
IPS ½" through 2"
Best for
True union means both ends unscrew, so the valve comes out for service without cutting the line — the difference between a ten-minute job and re-plumbing a section. Quarter-turn on/off. One-year warranty
Get pricingCatalog ↗

Schedule 40 PVC Fittings & Accessories

Hose & fittings
Best for
The standard pressure fitting range — elbows, tees, couplings, reducers, adapters and unions in Schedule 40 PVC for irrigation mainlines and manifolds
Get pricingCatalog ↗

Schedule 80 PVC & CPVC Fittings

Hose & fittings
Best for
Heavier wall than Schedule 40 for higher pressure and industrial duty, and CPVC where the water runs hot or the chemistry is aggressive — fertiliser injection lines especially
Get pricingCatalog ↗

Check Valves

Hose & fittings
Best for
Stops backflow into the supply — required on any line carrying fertiliser or chemical. Schedule 40 and Schedule 80 bodies
Get pricingCatalog ↗

Need pricing or a spec on these Spears products? Call (864) 862-5000 or request a quote.

Irritec

PVC Ball Valves

Hose & fittings
Connection
Schedule 40 PVC, UV protected
Best for
UV-protected Schedule 40 PVC that resists fertilisers and chemicals, and stays easy to open and close after a season in the sun
Get pricingCatalog ↗

Need pricing or a spec on these Irritec products? Call (864) 862-5000 or request a quote.

Tavlit

Ball Valves

Hose & fittings
Connection
Female x female or male x female; lever or T-handle; swivel versions available
Sizes
½", ¾" and 1" — catalogue numbers BV12F / BV34F / BV1F (female x female), BV12FM / BV34FM / BV1FM (male x female), and BV12FT / BV34FT / BV1FT and BV12FMT / BV34FMT / BV1FMT for the T-handle versions
Best for
Twelve catalogue numbers across three sizes and four handle/thread combinations, so the valve matches the run rather than needing an adaptor either side. The T-handle gives more leverage on a valve that gets opened and shut daily; the swivel versions let you line up the body without twisting the pipe
Get pricingCatalog ↗

Butterfly Valves

Hose & fittings
Connection
Brass and polypropylene bodies; valve-box mounting available
Sizes
2" and 4"; catalogue numbers BFV12Q and BFVP
Best for
Butterfly pattern for larger-diameter isolation where a ball valve becomes hard to turn. Brass or polypropylene body depending on water chemistry
Get pricingCatalog ↗

Compression Fittings & Connectors

Hose & fittings
Connection
Compression on PE pipe; male and female threaded adaptors, tees, elbows, crosses, end plugs, starters and nut locks
Sizes
FC series couplings from ½" to 2" including reducing sizes (FC12, FC34, FC1, FC114, FC112, FC2, FC1234, FC134, FC112114) and FA series adaptors (FA1234, FA1634, FA1734B, FA2034)
Best for
A full compression range with the reducing couplings that matter in practice — FC1234 joins ½" to ¾", FC134 joins ¾" to 1", FC112114 steps 1¼" to 1½". Nut-lock design so the joint holds without a clamp
Get pricingCatalog ↗

Need pricing or a spec on these Tavlit products? Call (864) 862-5000 or request a quote.

Antelco

Micro Fittings

Hose & fittings
Best for
The barbed micro fittings that join 4/7 and ¼" tube — tees, elbows, couplings and plugs
Get pricingCatalog ↗

Xpando Fittings & Take-Off Director

Hose & fittings
Best for
The Xpando grips by expanding into the punched hole rather than relying on a barb alone, which is what stops take-offs blowing out under pressure
Get pricingCatalog ↗

Double Barb DB Fittings

Hose & fittings
Best for
Two barbs instead of one for a firmer hold on the tube
Get pricingCatalog ↗

Green Back Valves / eZyvalve4

Hose & fittings
Best for
Green Back and threaded valves plus the eZyvalve4 for isolating micro zones
Get pricingCatalog ↗

Need pricing or a spec on these Antelco products? Call (864) 862-5000 or request a quote.

Rivulis

PVC Molded Fittings

Hose & fittings
Best for
Rivulis moulded PVC fittings for connecting laterals and submains
Get pricingCatalog ↗

Need pricing or a spec on these Rivulis products? Call (864) 862-5000 or request a quote.

Dramm

Brass Hose Swivel

Hose & fittings
Flow
18 gpm
Sizes
Item 72700
Best for
The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.
Get pricingCatalog ↗

Hose Protector

Hose & fittings
Sizes
Item HP-625
Best for
The Hose Protector saves hose ends from unnecessary stress and strain. Utilizing a spring wound around a short length of hose, the Hose Protector connects between the faucet and your hose to prevent hose-end kinking and damage to hose couplings. This handy tool is made from zinc plated steel and heavy-duty, nickel plated brass. The Hose Protector has a 5/8 inch inside diameter. 3/4 inch male & female hose threads.
Get pricingCatalog ↗

Hose Extender

Hose & fittings
Sizes
Item HE-625
Best for
The Hose Extender is a flexible 24 extension of your hose which can be used with any Dramm water tool. Great for hand watering! Just place our Brass Shut-Off on one end and a 400 Water Breaker on the other. Made in the U.S.A. from reinforced synthetic rubber and heavy-duty brass 3/4 connections. 5/8 inside diameter.
Get pricingCatalog ↗

Brass Twisty Quick 5/8

Hose & fittings
Sizes
Item 625
Best for
The 625 and 675 Twisty Quick are 1/4 turn quick disconnects with hose barb fittings for use with blunt cut hoses. Secure hose to the fitting with a hose clamp (not provided). Can be used in any combination with 775M and 775F Twisty Quick. Made in Germany from forged brass. Order item 625 for 5/8 ID hose or item 675 for 3/4 ID hose.
Get pricingCatalog ↗

Threaded Brass Twisty Quick - Male

Hose & fittings
Sizes
Item 775M
Best for
The 775M & 775F Twisty Quick are 1/4 turn Quick Disconnects. Makes any threaded hose connection easy to couple/uncouple. Can be used in any combination with 625 & 675 Twisty Quick. Made in Germany from forged brass. 775M - 3/4 male hose thread, 775F - 3/4 female hose thread.
Get pricingCatalog ↗

Twisty Quick

Hose & fittings
Sizes
Item 710
Best for
Twisty Quick-- plastic quick connect hose adapter. Full water flow design. Our patented design is made from heavy-duty plastic. 3/4 male and female hose threads. Sold as a pair only.
Get pricingCatalog ↗

Brass Quick Disconnect

Hose & fittings
Sizes
Item 740
Best for
The 740 Brass quick connects offer full flow without water-stop. Made in the USA.
Get pricingCatalog ↗

ColorStorm Hose 5/8 in 50 ft

Hose & fittings
Sizes
Item 17003, 17203, 17303, 17999, 17013, 17213, 17313, 17989
Get pricingCatalog ↗

Nickel Plated, Machined Brass Hose Fittings for ColorStorm Hose

Hose & fittings
Sizes
Item -
Get pricingCatalog ↗

DrammPress Frame

Hose & fittings
Sizes
Item DP-FRAME
Best for
The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.
Get pricingCatalog ↗

Fitting/Ferrule Set 5/8 in Male 12 pk

Hose & fittings
Sizes
Item 10-17810
Best for
Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose
Get pricingCatalog ↗

Dramm Heavy-Duty Hose Reel

Hose & fittings
Sizes
Item 17400
Best for
The Heavy-Duty Hose Reel provides durable hose management without kinks or twists. Easy to wind and unwind, the reel comes with an adjustable brake to prevent freewheeling and convex sides that prevents pinching against the sides of the reel. A rigid mount and stainless steel axle ensure that there is no flexing or bouncing under the weight of the hose filled with water.
Get pricingCatalog ↗

Heavy-Duty Hose Guide

Hose & fittings
Sizes
Item 17410
Best for
The galvanized steel hose guide provides easy hose management, keeping hoses in the aisle and preventing them from knocking over plants. The 6 nylon roller eases hose pulling by reducing resistance.
Get pricingCatalog ↗

Need pricing or a spec on these Dramm products? Call (864) 862-5000 or request a quote.

Need pricing on any of these hose, pvc & fittings? Send the model and quantity, or just describe the block, and we'll come back with wholesale pricing within one business day. Everything on this page is sold to production nurseries, greenhouses and education programs.

Request a quoteCall (864) 862-5000

Other product categories

AC Irrigation Controllers · AC Solenoid Valves · Accessories & Spare Parts · Air & Vacuum Vents · Bench & Tubing Support · Chlorination · DC & Battery Irrigation Controllers · DC Latching Solenoid Valves · Drip Tape · Dripline · Fertilizer Injectors · Filtration · Hand Watering Tools · Hanging Basket Assemblies · Layflat Hose · Metal Impact Sprinklers · Micro-Sprinklers · Misters & Foggers · Multi-Outlet Drippers (MODS) · Oval Hose · Plastic Impact Sprinklers · Poly Tubing · Pressure Reducing Valves · Pressure Regulators · Pressure Sustaining Valves · Pump Start Relays & Pump Protection · Pumps · Specialized Tools · Spray & Fogging Equipment · Spray Stakes & Emitters · Water Meters · Wire & Cable · Wobblers