(864) 862-5000

ML Irrigation / Products / Plastic Impact Sprinklers

Plastic Impact Sprinklers

Plastic impact sprinklers for can yards, open ground and frost protection — flow rates, trajectories and throw diameters.

20 products · 5 manufacturers · wholesale pricing · ships nationwide

Request a quoteCall (864) 862-5000

Plastic Impact Sprinklers: compare all 20 side by side

flow, pressure, throw diameter, trajectory and connection for every plastic impact sprinklers line we list, as published by 5 manufacturers. Where a cell shows a range or a list, those are the catalogued options; a dash means the catalog does not state it. Full details are on each product card below.

ManufacturerLineFlowPressureThrow diameterTrajectoryConnection
HunterSenninger 20 SeriesPlastic impact sprinkler (full circle)0.84–7.13 gpm25–50 psi—9°, 14° or 23° (models 2009 / 2014 / 2023)1/2" NPT male (female available)
HunterSenninger Compact ImpactPlastic impact sprinkler (full circle)3.08–7.13 gpm30–50 psi—23°3/4" NPT male
HunterSenninger WedgeDrivePlastic impact sprinkler (full circle)0.84–3.98 gpm25–50 psi—14° or 23° (9° also available)1/2" NPT male
HunterSenninger 30 SeriesPlastic impact sprinkler (full circle)1.84–6.42 gpm30–50 psi—12° (under-tree) or 23°3/4" NPT male (female available)
HunterSenninger 40 SeriesPlastic impact sprinkler (full circle)3.82–12.6 gpm30–60 psi——3/4" NPT male (female available)
HunterSenninger 50 SeriesPlastic impact sprinkler (full circle)6.5–20.1 gpm30–65 psi——3/4" NPT male
HunterSenninger Part-CirclePlastic impact sprinkler (part circle)—30–55 psi—23°3/4" NPT male
HunterSenninger 70 SeriesPlastic impact sprinkler (full circle)8.66–39.1 gpm40–70 psi——1" NPT male (1" BSPT available)
Rivulis5035 SDPlastic impact sprinkler (full circle)3.10–12.71 gpm35–70 psi80–111 ft—3/4" male
Rivulis5022 SDPlastic impact sprinkler (full circle)1.46–5.28 gpm25–60 psi63–85 ft—1/2" sprinkler carrier adaptor for Stand 52/53
Rivulis5024 SDPlastic impact sprinkler (full circle)1.38–4.30 gpm22–60 psi49–75 ft12° low angle—
Rivulis5030LTPlastic impact sprinkler3.7–8.7 gpm (831–1981 l/h)29–58 psi (2–4 bar)80–97 ft (24.5–29.5 m)25°3/4" male threaded inlet
Rivulis501-UPlastic impact sprinkler0.44–1.10 gpm (100–250 l/h)22–51 psi (1.5–3.5 bar)39–51 ft (12–15.5 m)—1/2" male quick connector, mounted on IrriStand 50
Rivulis6004 SDPlastic impact sprinkler (full circle)2.11–3.59 gpm (480–815 l/h)29–58 psi (2.0–4.0 bar)46–59 ft (14–18 m)4° low angle—
Rivulis6024 SDPlastic impact sprinkler (full circle)1.56–3.21 gpm (355–730 l/h)29–44 psi (2.0–3.0 bar)49–66 ft (15–20 m)12° low angle—
Rivulis6025 SDPlastic impact sprinkler (full circle)2.4–5.6 gpm (0.54–1.27 m³/h)36–58 psi (2.5–4.0 bar)62–89 ft (19–27 m)—1/2" NPSI female x 3/4" BSPP female adaptor; 3/4" PVC riser for Elite 50 mm
Rivulis427 GAG / 427B AG-UPlastic impact sprinkler (part circle)2.00–5.28 gpm30–60 psi72–85 ft—1/2" MPT, mounts on IrriStand 52
Rain Bird2045-PJ (Maxi-Bird)Plastic impact sprinkler (full or part circle)1.5–8.4 gpm25–60 psi—23° standard, 10° low-angle available1/2" male NPT, plastic bearing
NetafimMegaNet 15D / 24DPlastic impact sprinkler (encapsulated)0.88, 1.10, 1.54, 1.98, 2.42, 2.86 & 3.30 gpm (7 colour-coded nozzles)29–45 psi at the sprinkler headup to 40 ft wetted diameterHigh 24° (24D) or low 15° (15D)1/2" male threaded
Superior65P Plastic Impact SprinklerPlastic full / part circle impact sprinkler3.54–5.64 gpm25–60 psi33–47 ft spacing25°—

Plastic Impact Sprinklers by manufacturer

Netafim

MegaNet 15D / 24D

Plastic impact sprinkler
Flow
0.88, 1.10, 1.54, 1.98, 2.42, 2.86 & 3.30 gpm (7 colour-coded nozzles)
Pressure
29–45 psi at the sprinkler head
Connection
1/2" male threaded
Trajectory
High 24° (24D) or low 15° (15D)
Throw diameter
up to 40 ft wetted diameter
Best for
Two equal water jets keep it perfectly balanced — no wobble. Closed compact body blocks insect penetration; each unit has its own filter. High angle for open-field nurseries, vegetables, germination, frost protection and orchard cooling; low angle for shade/net houses and under-tree. Filtration: none needed on clean water, 40 mesh on surface water, hydrocyclone on sandy well water. Optional MegaStand connects leak-free to FlexNet
Get pricingCatalog ↗

Need pricing or a spec on these Netafim products? Call (864) 862-5000 or request a quote.

Rain Bird

2045-PJ (Maxi-Bird)

Plastic impact sprinkler
Flow
1.5–8.4 gpm
Pressure
25–60 psi
Connection
1/2" male NPT, plastic bearing
Trajectory
23° standard, 10° low-angle available
Radius
22–45 ft
Best for
Rain Bird calls it a workhorse for nursery use — greenhouse, nursery, can yards and climate control. Delrin plastic, trip collars adjust 20°–360°, patented Precision-Jet S-tube stops side splash, five colour-coded Quick Fit nozzles. Good grit and chemical resistance for dirty water
Get pricingCatalog ↗

Need pricing or a spec on these Rain Bird products? Call (864) 862-5000 or request a quote.

Rivulis

5035 SD

Plastic impact sprinkler
Flow
3.10–12.71 gpm
Pressure
35–70 psi
Connection
3/4" male
Throw diameter
80–111 ft
Sizes
Single nozzle or dual nozzle; #18 (9/64", 3.5 mm) and larger, colour-coded bayonet
Best for
General field use on solid-set systems. Unique hammer with the SD super-diffuser plate holds uniform distribution on single or dual nozzles at spacings up to 65 ft, and the impact drive handles wind. Colour-coded bayonet nozzle with an integrated stream-straightening vane for maximum range. Full and part circle; a PC version is also listed. Heavy-duty plastic resists corrosion, chemicals and UV
Get pricingCatalog ↗

5022 SD

Plastic impact sprinkler
Flow
1.46–5.28 gpm
Pressure
25–60 psi
Connection
1/2" sprinkler carrier adaptor for Stand 52/53
Throw diameter
63–85 ft
Sizes
Single or dual nozzle — #12 (3/32"), #14, #15 and up, colour-coded bayonet
Best for
Irrigation and germination of vegetables, flowers and nursery crops. Hammer plus SD super-diffuser plate gives uniform distribution across a wide spacing range, including good coverage on field boundaries. Reduced clogging sensitivity and high wind resistance; short-cycle friendly for germination. Full and part circle
Get pricingCatalog ↗

5024 SD

Plastic impact sprinkler
Flow
1.38–4.30 gpm
Pressure
22–60 psi
Trajectory
12° low angle
Throw diameter
49–75 ft
Sizes
#12 (3/32", 2.5 mm) and up, colour-coded bayonet
Best for
Undertree irrigation in orchards and plantations — table grapes and bananas especially. The 12° low-angle body keeps the stream under the canopy, and it holds uniformity down to 22 psi. Optional anti-theft adaptor. UV and impact resistant
Get pricingCatalog ↗

5030LT

Plastic impact sprinkler
Flow
3.7–8.7 gpm (831–1981 l/h)
Pressure
29–58 psi (2–4 bar)
Connection
3/4" male threaded inlet
Trajectory
25°
Throw diameter
80–97 ft (24.5–29.5 m)
Sizes
Single or dual nozzle — 4.0 mm black, 3.5 mm blue and others
Best for
Cost-focused field sprinkler for pulses, oilseeds, vegetables and cereals, with the Super Diffuser plate for distribution. Springs protected with a cap and ring; heavy-duty spindle and fulcrum pin. Carries a specific one-year limited warranty rather than the standard Rivulis terms
Get pricingCatalog ↗

501-U

Plastic impact sprinkler
Flow
0.44–1.10 gpm (100–250 l/h)
Pressure
22–51 psi (1.5–3.5 bar)
Connection
1/2" male quick connector, mounted on IrriStand 50
Throw diameter
39–51 ft (12–15.5 m)
Sizes
1.6 mm red and 1.8 mm green nozzles
Best for
Turbo-hammer low-volume sprinkler for vegetables — leafy greens especially — and greenhouses, at spacings up to 26 ft (8 m). Fine droplets for delicate crops; corrosion-resistant metal parts and easy inspection for maintenance
Get pricingCatalog ↗

6004 SD

Plastic impact sprinkler
Flow
2.11–3.59 gpm (480–815 l/h)
Pressure
29–58 psi (2.0–4.0 bar)
Trajectory
4° low angle
Throw diameter
46–59 ft (14–18 m)
Best for
Ground-level precision for orchards and plantations, aimed at table grapes and bananas. The 4° low angle throws a flat stream close to the ground so foliage stays dry, and a special arched water path maximises coverage diameter. Drive mechanism is designed to resist snail damage. UV and impact resistant
Get pricingCatalog ↗

6024 SD

Plastic impact sprinkler
Flow
1.56–3.21 gpm (355–730 l/h)
Pressure
29–44 psi (2.0–3.0 bar)
Trajectory
12° low angle
Throw diameter
49–66 ft (15–20 m)
Best for
Under-canopy irrigation in orchards and plantations — table grapes and bananas. Low-angle, low-volume build with the SD super-diffuser plate and an arched water path for maximum coverage. Snail-resistant drive; colour-coded bayonet nozzles. UV resistant
Get pricingCatalog ↗

6025 SD

Plastic impact sprinkler
Flow
2.4–5.6 gpm (0.54–1.27 m³/h)
Pressure
36–58 psi (2.5–4.0 bar)
Connection
1/2" NPSI female x 3/4" BSPP female adaptor; 3/4" PVC riser for Elite 50 mm
Throw diameter
62–89 ft (19–27 m)
Sizes
2.8 mm orange, 3.0 mm red and up, colour-coded bayonet
Best for
Irrigation and germination of vegetables, field crops and flowers on short cycles. Arched water path widens the radius so fewer sprinklers cover the block — spacing 12–16 m. Reduced clogging sensitivity, high wind resistance, and full protection of the spring and axle area
Get pricingCatalog ↗

427 GAG / 427B AG-U

Plastic impact sprinkler
Flow
2.00–5.28 gpm
Pressure
30–60 psi
Connection
1/2" MPT, mounts on IrriStand 52
Throw diameter
72–85 ft
Best for
Plastic impact sprinkler in heavy-duty materials resistant to corrosion, chemicals and UV
Get pricingCatalog ↗

Need pricing or a spec on these Rivulis products? Call (864) 862-5000 or request a quote.

Hunter

Senninger 20 Series

Plastic impact sprinkler
Flow
0.84–7.13 gpm
Pressure
25–50 psi
Connection
1/2" NPT male (female available)
Trajectory
9°, 14° or 23° (models 2009 / 2014 / 2023)
Best for
Senninger’s most economical impact — risers or under-tree. Colour-coded nozzles, built-in hex wrench
Get pricingCatalog ↗

Senninger Compact Impact

Plastic impact sprinkler
Flow
3.08–7.13 gpm
Pressure
30–50 psi
Connection
3/4" NPT male
Trajectory
23°
Best for
Splasharm diffuser splits the stream to bring flow closer in for better close-range coverage
Get pricingCatalog ↗

Senninger WedgeDrive

Plastic impact sprinkler
Flow
0.84–3.98 gpm
Pressure
25–50 psi
Connection
1/2" NPT male
Trajectory
14° or 23° (9° also available)
Best for
Low flows and low pressures; wedge drive resists grit wear
Get pricingCatalog ↗

Senninger 30 Series

Plastic impact sprinkler
Flow
1.84–6.42 gpm
Pressure
30–50 psi
Connection
3/4" NPT male (female available)
Trajectory
12° (under-tree) or 23°
Best for
Mid-range solid set and under-tree irrigation
Get pricingCatalog ↗

Senninger 40 Series

Plastic impact sprinkler
Flow
3.82–12.6 gpm
Pressure
30–60 psi
Connection
3/4" NPT male (female available)
Best for
Higher flows over larger spacings on solid set
Get pricingCatalog ↗

Senninger 50 Series

Plastic impact sprinkler
Flow
6.5–20.1 gpm
Pressure
30–65 psi
Connection
3/4" NPT male
Best for
High-flow solid set where wide spacing is needed
Get pricingCatalog ↗

Senninger Part-Circle

Plastic impact sprinkler
Pressure
30–55 psi
Connection
3/4" NPT male
Trajectory
23°
Radius
38–42 ft at 1.5 ft height
Best for
Field edges, headlands and boundaries where a full circle would overthrow
Get pricingCatalog ↗

Senninger 70 Series

Plastic impact sprinkler
Flow
8.66–39.1 gpm
Pressure
40–70 psi
Connection
1" NPT male (1" BSPT available)
Best for
Highest flows over large diameters — Senninger states it outlasts and costs less than brass
Get pricingCatalog ↗

Need pricing or a spec on these Hunter products? Call (864) 862-5000 or request a quote.

Superior

65P Plastic Impact Sprinkler

Plastic impact sprinkler
Flow
3.54–5.64 gpm
Pressure
25–60 psi
Trajectory
25°
Throw diameter
33–47 ft spacing
Sizes
1/2" — 65P10, nozzle 10
Best for
Their one plastic impact, and Superior name nurseries and greenhouses among its intended uses. Heavy-duty plastic body with stainless steel springs and fulcrum pin, adjustable diffuser pin, anti-backsplash arm and a stream-straightening vane built into the bayonet nozzle. Chemical-resistant bearing seals. Rotates 20° to 340° or full circle. The budget option for temporary blocks and short-life installations where a brass head is not worth burying
Get pricingCatalog ↗

Need pricing or a spec on these Superior products? Call (864) 862-5000 or request a quote.

Need pricing on any of these plastic impact sprinklers? Send the model and quantity, or just describe the block, and we'll come back with wholesale pricing within one business day. Everything on this page is sold to production nurseries, greenhouses and education programs.

Request a quoteCall (864) 862-5000

Other product categories

AC Irrigation Controllers · AC Solenoid Valves · Accessories & Spare Parts · Air & Vacuum Vents · Bench & Tubing Support · Chlorination · DC & Battery Irrigation Controllers · DC Latching Solenoid Valves · Drip Tape · Dripline · Fertilizer Injectors · Filtration · Hand Watering Tools · Hanging Basket Assemblies · Hose, PVC & Fittings · Layflat Hose · Metal Impact Sprinklers · Micro-Sprinklers · Misters & Foggers · Multi-Outlet Drippers (MODS) · Oval Hose · Poly Tubing · Pressure Reducing Valves · Pressure Regulators · Pressure Sustaining Valves · Pump Start Relays & Pump Protection · Pumps · Specialized Tools · Spray & Fogging Equipment · Spray Stakes & Emitters · Water Meters · Wire & Cable · Wobblers