Punch tips including 12 mm, 15 mm and 18 mm; with or without saddle
Best for
A threaded handle and a sharp punch tip make a clean hole with one hand, and the plastic slug stays out of the pipe rather than washing downstream into an emitter. Winged and threaded handle versions; separate punches for start connectors
Pro Grip and 8 mm models; versions for PE pipe and for micro-tube
Best for
Seats drippers, connectors and fittings without fighting the pipe or splitting the barb. Separate ranges for PE lateral and for micro-tube, and combined punch-and-insert tools that do both in one motion
9, 12, 13, 14, 15, 16, 16.5, 17, 19, 20 and 42 mm (LFC series)
Best for
Cuts a clean sized hole in layflat for the outlet fitting — eleven sizes so the hole matches the connector instead of being stretched to fit, which is what starts a leak
QDS small — 3.2, 3.7, 7.5, 8.2, 9, 11, 12 mm · QDB big — 8.2, 11, 12, 14, 15, 17, 22, 24 mm
Best for
Two bodies covering 3.2 mm up to 24 mm, so one tool family spans a micro-tube take-off and a submain saddle. Spare punch tips are sold separately for both, which means a blunt tip is a two-minute change rather than a new tool
The threaded handle winds the punch through the wall rather than relying on hand force, and the plastic slug stays out of the hole instead of dropping into the pipe. Sharp tip on a winged handle — the tool for larger holes where a plain punch is hard work
TR3 with one 3 mm punch · TR2,3 with 2 and 3 mm · TR2,3,4 with 2, 3 and 4 mm; spare punches in 2, 3 and 4 mm
Best for
Squeeze-trigger punch, so a whole lateral gets punched without twisting a handle hundreds of times — the difference matters by the end of a row. Multi-punch heads carry two or three sizes at once so you are not swapping tools mid-run
Pulls a dripper back out of the lateral without tearing the hole — so a blocked emitter can be swapped and the same hole reused, rather than plugging it and punching again
Includes Turbo Drip (Naan) and Plastro/Antelco-specific heads
Best for
Punches the hole and seats the dripper in one motion instead of two passes down the row. Heads are made to suit specific dripper brands — Turbo Drip, Plastro and Antelco among them — so the fit is right for the barb being used
Comes with 10 in diameter ring and 36 rod to conveniently remove hanging baskets from hard-to-reach areas above! Rings also available for 8 or 12 inch pots. Rod also available in 60 in or 84 in lengths.
The ColorWear Apron is great for gardening, landcaping, interiorscaping and garden center workers. A unique center mesh zippered pocket holds deadheads and yard debris, unzipping to dump. Other pockets store tools. Keeps you clean while you work.
The Dramm Hand Pick Tool is used for the insertion of Dramm Brass Eyelets into poly tubing for the use of Dramm Dribble Tubes and Rings. Place an eyelet onto the tip of the Handpik tool and push firmly into the black poly tubing. The Hand Pick Tool will pierce the poly tubing and insert the brass eyelet in one leak-free operation!
Need pricing on any of these specialized tools? Send the model and quantity, or just describe the block, and we'll come back with wholesale pricing within one business day. Everything on this page is sold to production nurseries, greenhouses and education programs.
Al-Magor
Dramm