Al-Magor irrigation products for nurseries and greenhouses
Al-Magor make the hand tools that make a drip system serviceable — punches sized to the tubing, dripper inserters and extractors, and the repair tools crews actually reach for. Small items, but the difference between a fast repair and a bodged one.
Punch tips including 12 mm, 15 mm and 18 mm; with or without saddle
Best for
A threaded handle and a sharp punch tip make a clean hole with one hand, and the plastic slug stays out of the pipe rather than washing downstream into an emitter. Winged and threaded handle versions; separate punches for start connectors
Pro Grip and 8 mm models; versions for PE pipe and for micro-tube
Best for
Seats drippers, connectors and fittings without fighting the pipe or splitting the barb. Separate ranges for PE lateral and for micro-tube, and combined punch-and-insert tools that do both in one motion
9, 12, 13, 14, 15, 16, 16.5, 17, 19, 20 and 42 mm (LFC series)
Best for
Cuts a clean sized hole in layflat for the outlet fitting — eleven sizes so the hole matches the connector instead of being stretched to fit, which is what starts a leak
QDS small — 3.2, 3.7, 7.5, 8.2, 9, 11, 12 mm · QDB big — 8.2, 11, 12, 14, 15, 17, 22, 24 mm
Best for
Two bodies covering 3.2 mm up to 24 mm, so one tool family spans a micro-tube take-off and a submain saddle. Spare punch tips are sold separately for both, which means a blunt tip is a two-minute change rather than a new tool
The threaded handle winds the punch through the wall rather than relying on hand force, and the plastic slug stays out of the hole instead of dropping into the pipe. Sharp tip on a winged handle — the tool for larger holes where a plain punch is hard work
TR3 with one 3 mm punch · TR2,3 with 2 and 3 mm · TR2,3,4 with 2, 3 and 4 mm; spare punches in 2, 3 and 4 mm
Best for
Squeeze-trigger punch, so a whole lateral gets punched without twisting a handle hundreds of times — the difference matters by the end of a row. Multi-punch heads carry two or three sizes at once so you are not swapping tools mid-run
Pulls a dripper back out of the lateral without tearing the hole — so a blocked emitter can be swapped and the same hole reused, rather than plugging it and punching again
Includes Turbo Drip (Naan) and Plastro/Antelco-specific heads
Best for
Punches the hole and seats the dripper in one motion instead of two passes down the row. Heads are made to suit specific dripper brands — Turbo Drip, Plastro and Antelco among them — so the fit is right for the barb being used
Brass inserter adapters, 3 mm and 4 mm adapters, spare punches for QDB and QDS
Best for
The consumables side — adapters that let one handle drive different inserter heads, and replacement punch tips so a worn tool is refreshed rather than replaced
We sell Al-Magor equipment wholesale to production nurseries, greenhouse operations and horticulture education programs, and ship from Fountain Inn, South Carolina, to growers in all 50 states.
The Al-Magor range published by the manufacturer is larger than what any distributor lists online. If the model, size or spacing you need is not on this page, send the part number or describe the job and we'll quote it. For a full system we would rather see your water source, pressure and crop first: tell us those and we'll help you spec it from the pump to the plant.
Need Al-Magor pricing or a part that is not listed? Send the part number or describe the job and we'll quote it within one business day.
