ML Irrigation / Manufacturers / Tavlit

Tavlit irrigation products for nurseries and greenhouses

Tavlit make the practical middle of an irrigation system — valves, filters, fittings and sprinklers that do the job without the price of a premium badge. Useful where a system needs sound components in quantity rather than the top of a manufacturer's range.

23 products · 5 categories · wholesale pricing · ships nationwide

Request Tavlit pricingCall (864) 862-5000

Tavlit lines we stock

23 lines across 5 categories, as catalogued on this site. Sizes, spacings and flow rates within each line are on the cards below.

Tavlit products by category

Micro-sprinkler 16

861 Mini Compact

Micro-sprinkler
Flow
0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure
Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.
PC version available
Throw diameter
18–30 ft (5.5–9.0 m)
Best for
Large wetting diameter, and can be run inverted. Anti-insect swivel seals the nozzle when water shuts off; integral nozzle filter. Filtration 100 mesh to 40 lph, 80 mesh to 90 lph, 60 mesh to 160 lph

862 Mini Compact

Micro-sprinkler
Flow
0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure
Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.
PC version available
Throw diameter
12.5–23.6 ft (3.8–7.2 m)
Best for
Medium wetting diameter; optional RJC removable jet converter cuts the diameter for young plants and trees

863 Mini Compact

Micro-sprinkler
Flow
from 0.09 gpm (20 l/h) at 29 psi
Pressure
Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.
PC version available
Throw diameter
18–30 ft (5.5–9.0 m)
Best for
Small wetting diameter, low flow and large droplets for wind resistance. Optional RJC converter for young stock

866 Mini Compact

Micro-sprinkler
Flow
0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure
Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.
PC version available
Throw diameter
18–30 ft (5.5–9.0 m)
Best for
Flat angle with large wetting diameter, designed for inverted mounting

80X Series Bridge Design

Micro-sprinkler
Flow
0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Throw diameter
1–33 ft (0.2–10.5 m)
Best for
Robust bridge design for harsh conditions. Series 800 large wetting diameter, 801 low pressure with large diameter, 803 inverted for greenhouses

803 Upside Down

Micro-sprinkler
Flow
0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Throw diameter
1–33 ft (0.2–10.5 m)
Best for
Installed inverted for greenhouse irrigation

806 Static Sprayer

Micro-sprinkler
Flow
0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Throw diameter
1–33 ft (0.2–10.5 m)
Best for
Static sprayer (806 / 806S) for medium to small wetting diameter

807 Bubbler

Micro-sprinkler
Flow
0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Throw diameter
1–33 ft (0.2–10.5 m)
Best for
Bubbler head for basin and container irrigation

TriJet Series

Micro-sprinkler
Flow
0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure
22–52 psi (1.5–3.5 bar)
Pressure comp.
PC version available
Best for
Three-jet static sprayer within the 4XXX range

Peleg Series

Micro-sprinkler
Flow
0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure
22–52 psi (1.5–3.5 bar)
Pressure comp.
PC version available
Best for
Static sprayer head within the 4XXX range

961 Single Jet

Micro-sprinkler
Flow
0.53 & 0.70 gpm (120 & 160 l/h)
Pressure
22–52 psi (1.5–3.5 bar)
Best for
Single jet, low flow to cut precipitation rate while holding uniformity

4XXX Series

Micro-sprinkler
Flow
0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure
22–52 psi (1.5–3.5 bar)
Pressure comp.
PC version available
Best for
Static emitters — no moving parts. NFR nozzle flow reducer gives low flow through a relatively large nozzle to prevent clogging. Irrigates with fine drops and no mist. Colour-coded sprayer heads

831 Insect Protected

Micro-sprinkler
Flow
0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Pressure comp.
PC version available
Throw diameter
18–33 ft (5.5–10.4 m)
Best for
Large wetting diameter. Nozzle-protection swivel shuts off after operation so insects and dirt cannot enter the water passages. Runs as low as 1 bar and 14 lph

841 Insect Protected

Micro-sprinkler
Flow
0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Pressure comp.
PC version available
Throw diameter
18–33 ft (5.5–10.4 m)
Best for
Large/medium wetting diameter with the same anti-insect swivel; special bridge design prevents dripping

850 / 850D Part Circle

Micro-sprinkler
Flow
0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Pressure comp.
PC version available
Throw diameter
18–33 ft (5.5–10.4 m)
Best for
Part circle covering a 200° sector; adding the 850D deflector reduces it to 180°. Ideal for strip irrigation with heads overlapping from both sides
Flow
0.18–0.70 gpm (40–160 l/h) at 29 psi
Pressure
21–32 psi (1.5–2.2 bar)
Throw diameter
10–18 ft (3.0–5.4 m)
Sizes
7 nozzles, 0.9–1.8 mm (.039"–.071")
Best for
A thin needle inside the orifice vibrates in operation, constantly clearing the nozzle and stopping debris building up; it also shuts the nozzle at the end of irrigation. Can be inverted to shrink the wetted diameter for young plantations, then set upright as the tree grows

Mister & fogger 1

809 Mister

Mister & fogger
Flow
0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure
14.5–36 psi (1.0–2.5 bar)
Throw diameter
1–33 ft (0.2–10.5 m)
Best for
Misting head within the 80X bridge-design range

Hose & fittings 3

Ball Valves

Hose & fittings
Connection
Female x female or male x female; lever or T-handle; swivel versions available
Sizes
½", ¾" and 1" — catalogue numbers BV12F / BV34F / BV1F (female x female), BV12FM / BV34FM / BV1FM (male x female), and BV12FT / BV34FT / BV1FT and BV12FMT / BV34FMT / BV1FMT for the T-handle versions
Best for
Twelve catalogue numbers across three sizes and four handle/thread combinations, so the valve matches the run rather than needing an adaptor either side. The T-handle gives more leverage on a valve that gets opened and shut daily; the swivel versions let you line up the body without twisting the pipe

Butterfly Valves

Hose & fittings
Connection
Brass and polypropylene bodies; valve-box mounting available
Sizes
2" and 4"; catalogue numbers BFV12Q and BFVP
Best for
Butterfly pattern for larger-diameter isolation where a ball valve becomes hard to turn. Brass or polypropylene body depending on water chemistry

Compression Fittings & Connectors

Hose & fittings
Connection
Compression on PE pipe; male and female threaded adaptors, tees, elbows, crosses, end plugs, starters and nut locks
Sizes
FC series couplings from ½" to 2" including reducing sizes (FC12, FC34, FC1, FC114, FC112, FC2, FC1234, FC134, FC112114) and FA series adaptors (FA1234, FA1634, FA1734B, FA2034)
Best for
A full compression range with the reducing couplings that matter in practice — FC1234 joins ½" to ¾", FC134 joins ¾" to 1", FC112114 steps 1¼" to 1½". Nut-lock design so the joint holds without a clamp

Bench & tubing support 1

Agri Stands & Adjustable Risers

Bench & tubing support
Best for
Stands and adjustable risers to carry a sprinkler at the right height above the crop as it grows

Spray stakes & emitters 2

PC Dripper Assemblies & Drip Kits

Spray stakes & emitters
Pressure comp.
Yes
Best for
Ready-made PC dripper assemblies and drip kits — dripper, tube and spike supplied together rather than assembled on the bench

Drip Spike

Spray stakes & emitters
Best for
Spike that anchors the dripper tube in the pot so it stays where it was set

Buying Tavlit products from ML Irrigation

We sell Tavlit equipment wholesale to production nurseries, greenhouse operations and horticulture education programs, and ship from Fountain Inn, South Carolina, to growers in all 50 states.

The Tavlit range published by the manufacturer is larger than what any distributor lists online. If the model, size or spacing you need is not on this page, send the part number or describe the job and we'll quote it. For a full system we would rather see your water source, pressure and crop first: tell us those and we'll help you spec it from the pump to the plant.

Need Tavlit pricing or a part that is not listed? Send the part number or describe the job and we'll quote it within one business day.

Request Tavlit pricingCall (864) 862-5000

Tavlit by category

Micro-sprinkler·Mister & fogger·Hose & fittings·Bench & tubing support·Spray stakes & emitters